Advanced HDR Conversion

Mapping between color spaces to preserve artistic intent.

Flexible HDR Solutions to meet the need of your production.

Static Conversion

Static conversion from SDR to HDR or HDR to SDR can be done via a 3D-LUT file. The 3D-LUT file maps the color space, and applies the appropriate EOTF transfer curve. This mapping is applied to all the frames of video regardless of the signal. The Cobalt 9904-UDX-4K is able to insert static LUTS with the +3DLUT-PRO and +3DLUT-4K options. Adding the +3DLUT-BBC option allows the card to come preconfigured with standard LUTs suggested by the BBC for professional broadcast.

Dynamic Conversion

Dynamic conversion takes a static LUT as a base, and allows the user to customize the look and feel of the content in real time. While an up-mapped HDR signal, or down-mapped SDR signal can be technically “legal”, conversion can be optimized for the type of content that is being produced. Cobalt digital products are compatible with both the WonderLook Pro and LiveGrade Pro software that provide full control over the transfer curve and color correction.

Dynamic Intelligent Conversion

Dynamic intelligent conversion goes beyond dynamic conversion alone by allowing an algorithm to automatically adjust the color values based on the incoming video signal. Cobalt uses Technicolor’s suite of HDR conversion tools for this task. The toolset is informed by deep learning from Technicolor’s years of Hollywood colorimetry experience. Video is analyzed frame-by-frame in real time to make adjustments more quickly than a human operator could. As lighting conditions change over the course of a broadcast, the human operator has the ability to focus on other parts of the production.

Want to Learn More About HDR

See the latest Cobalt Digital HDR White Papers

Unleash your SDR Legacy Content

Select between convenience and control


In manual mode, the Technicolor ITM SDR to HDR controls give the user the ability to adjust the ranges betwen shadows, midtones, and highlights within the content.


Preset mode provides 28 preconfigured settings differentiated by brightness and contrast. Users have many options to customize the look and feel of the content, while not having all the controls included in the manual mode.
Additional adjustments include:

  • Limiter
  • Saturation
  • Sharpness


In auto mode, the Technicolor algorithm will adjust settings frame-by-frame in real time according to the incoming content. Fine tune adjustments can be made to the unit at the beginning of an event – but after that, the ITM process will make any adjustments due to changing lighting conditions during the event.

Bright spot analysis

Bright spot analysis and management: ability to ensure excessive bright spots are not created when converting from SDR to HDR that might detract from the creative intent of the video.

The ITM algorithm also includes advanced bright spot detection, which will isolate smaller points of light from larger bright spots within the frame. This way, when the light intensity increases from an SDR image to the brighter HDR image, lighting speculars won’t be drowned out by larger areas of light.

Noise Reduction

HDR content can get noisy, especially content shot on film. Technicolor‘s noise reduction is superior to anything currently on the market used for grading.

A static 3D-LUT typically does not have active noise reduction, this is very problematic in low light conditions, upgrading content from older cameras or cameras with small sensors or in cases with camera movement.

A powerful de-noising engine is included, as legacy SDR content will often come with a fair bit of noise. The ability to adjust the noise within the shadows and highlights helps to keep image detail while protecting against banding artifacts.



HDR Conversions

  • SDR to HDR
  • HDR to SDR
  • HDR to HDR

OETF Curves

  • PQ
  • HLG
  • SLOG 3

Color Space

  • Full
  • Legal
  • BT.709
  • BT.2020


  • BBC LUTs
  • 3rd Party Control
  • WonderLook Pro
  • LiveGrade pro

Video Format Conversion

  • 12G/6G/3G/HD/SD Up/Down/Cross Conversion
  • 12G-SDI Single wire or SDM/SI quad 3G-SDI

Frame Sync

  • Full frame synchronizer with dual reference
  • Audio/Video Offset Controls

Advanced Audio

  • 4 AES Pair Embedding/De-embedding
  • Dolby Encoding/Decoding
  • Audio Upmixing/Downmixing
  • Audio Loudness Leveling


  • Static & Dynamic

Master Control


COBALT WAVE 9942-RTR12G SDI Router for openGear® Frames

Keying and Branding

+KEYERKeyer Software Option
9902-UDX-DSP-CI3G/HD/SD-SDI/CVBS Channel Integrator — UDX/Frame Sync
9923-DSK-LG3G/HD/SD-SDI Downstream Keyer
BBG-1023-DSK-LG3G/HD/SD-SDI Standalone Downstream Keyer
+LOGOLogo Insertion Software Option

Multiviewers and Monitoring

9970-QS-MC3G/HD/SD-SDI/CVBS Expandable Master Control Multiviewer


OGCP-9000Remote Control Panel
OGCP-9000/CCColor Corrector Remote Control Panel
COBALT WAVE Control Series CP-84L 2U Remote Control Panel
COBALT WAVE Control Series CP-78 2U Remote Control Panel
COBALT WAVE Control Series CP-42L1U Remote Control Panel - Available Q3 2024
COBALT WAVE Control Series CP-441U Remote Control Panel - Available Q3 2024

SDI / ASI Bypass - Failover

9004 - discontinuedDual-Channel 3G/HD/SD Distribution Amplifier (Non-Reclocking)
91213G/HD/SD-SDI/ASI Redundancy Switch
9940-ACO3G/HD/SD-SDI Multi-Input Intelligent Auto-Changeover Switch
BBG-1040-ACO3G/HD-SD-SDI Multi-Input Intelligent Auto-Changeover Switch
9940-4x1-CS3G/HD/SD-SDI 4x1 Clean and Quiet Bypass Router
BBG-1040-4x1-CS3G/HD/SD-SDI Standalone 4x1 Clean and Quiet Bypass Router
+T-SLATETrouble Slate Import Software Option